GRP Flat Roofs Installations
What is a CURE IT GRP Roof?
A CURE IT GRP roof is a single-ply GRP laminate consisting of Cure It Roofing Resin and Chopped Strand Mat reinforcement.
This is roofing material applied in situ over a good quality OSB 3 deck. The roof is finished with pre-formed GRP edge trims and a coat of pre-pigmented Cure It topcoat.
We install flat roofs in North Yorkshire on domestic and commercial properties. Our installation process of a Cure It roof can be divided into the following 4 stages:
Preparing and decking the roof - The old roof covering is removed if necessary and the roof is re-decked with OSB3 18 mm tongue and groove boards.
Fixing the edge trims - GRP edge trims are fixed to the perimeter of the roof and can be used to adapt the Cure it laminate to almost any specification.
Laminating - Joints between decking, gutters, GRP trims and protrusions e.g. roof lights are bandaged at this point. The entire roof is then laminated with a layer of GRP.
Top coating and finishing - The roof is then top coated, with the client’s specification of colour and finish
Approved installers of Cure It Roofs in North Yorkshire at low prices.
There are a number of different options available for the weight, colour and finish of the roof. You can choose one of the options below from our Cure It Roof Installations service:
The Cure It laminate can be specified in two weights: 450g/m2 and 600g/m2.
450g/m2 is the standard weight for most installations and will withstand foot traffic.
600g/m2 should be specified where the roof will be subject to regular heavy foot traffic such as a walkway or balcony. This would be specified with an aggregate non-slip finish.